Batteries have become an integral part of our daily lives. Different devices require specific types. This article will discuss the SR62 battery, its characteristics, and features.
Technical specifications
| Standard size | SR62 |
| Material | silver-zinc |
| Form | round tablet |
| Voltage | 1.55 V |
| Capacity | 10.5 mAh |
| Weight | 0.18 g |
| Height | 1.6 mm |
| Diameter | 5.2 mm |
| Operating temperature range | 0 °C … 60 °C |
Manufacturers
The main manufacturers of SR62 are:
SEIZAIKEN
Seiko
Toshiba
Renata
Sony
Rexant
SR62 analogs
There are analogues with similar voltage or diameter, which can sometimes replace each other:
— 317
— SR516SW
— SB-AR
— RW326
— 1185SO
— S52
Main differences from other similar batteries
The SR62 battery is very light and smaller in size, but also has a rather low capacity. Batteries with a lower capacity are also available. capacity, but they are larger in size. Below is a table for comparison.
| Name | Capacity, mAh | Dimensions mm |
| 339, SR614SW | 11 | 6.8 x 1.4 |
| 341, SR714SW | 15 | 7.9 x 1.4 |
| 346, SR712SW, SB-DH | 10 | 7.9 x 1.2 |
| SR63, 379, SR521SW, SBAC-DC, RW327, G0 | 15 | 5.8 x 2.1 |
Where is it used?
It is used only for devices that consume extremely low amounts of power. Also, due to its small size, the SR62 is suitable for small devices such as:
Wrist watch,
Remote control,
Calculators,
LED lights,
Children's toys,
Keychains,
Other miniature devices.
What is prohibited to do with a battery?
It's highly recommended to avoid storing the SR62 battery near heating devices, such as a stove or fireplace in the kitchen, or radiators, or leaving it in direct sunlight. Significant capacity loss (up to 30%) occurs when exposed to hot and humid air. It's also important to avoid sudden temperature changes to prevent condensation inside the cell.
Where to buy?
Element
Shop-device
Satom.ru
WOW
Construction world
Electrozone
Goodmag
ONLINETRADE.RU
Consumer Advice
When purchasing, it is necessary to carefully examine the product packaging:
- the packaging is intact,
— the expiration date does not exceed the one indicated on the packaging,
— the physical consistency of the filler should be gel-like,
- additives preferably with gas absorption,
— the tablet should not have any signs of corrosion, white coating or cloudiness.
Proper selection and consideration of all operating features will ensure long and high-quality service of SR62 batteries.
