The Suunto D4i occasionally needs a new battery. This is normal, as batteries that last forever haven't been created yet. The DL 2450 battery is the best choice. Its capacity is approximately 600 mAh, meaning it will last quite a long time. Its voltage is 3 volts. This battery weighs approximately 6 grams. It can operate from -30 to +60 degrees Celsius.0More details about this element are written in this article.
Special battery replacement kits for the Suunto D4i are available at retail outlets. They typically include:
- Cleaning stick.
- Rubber ring.
- Power supply element.
The battery shown in the picture may not always be included. The key is to ensure the voltage matches the used battery. The cost of such a kit ranges from approximately 700 rubles.
If your Suunto D4i starts rebooting while diving, it's time to replace the battery.
Replacing the battery in a Suunto D4i dive computer
Initially, you will have to acquire a tool such as a small Phillips screwdriver and buy a power source.
Action plan:
- Unscrew the two bolts. Be careful, there are marks on the body and cover. These help ensure the cover is positioned correctly during reassembly.
- Using careful movements, remove the o-ring from the lid.
- We wipe off the dirt from the ring and clean everything underneath it as well.
- We remove the used element from the Suunto D4i.
- We install a new one.
- We coat the o-ring with non-aggressive silicone grease.
- We install the cover and tighten the bolts.
- We are checking the device.
It is best to use batteries for suunto d4i from companies Varta, as they are best suited for this device.
Before replacing the battery, wash your hands or avoid touching the battery. If you handle the battery with tweezers, be careful not to short-circuit the terminals. It's best not to use tweezers to remove or insert the battery at all.
Video on replacing the battery in a Suunto D4i
