To ensure continuous video monitoring of your baby, you need to replace the batteries regularly. Motorola baby monitors use two or three batteries. This depends on the type of your device. Typically, these are 1.2-volt batteries covered with a green film. This article will cover their basic specifications.
Motorola baby monitor battery specifications
These batteries are distributed in paper packaging with a plastic protective cover. Once opened, we find battery power sources connected in series. Typically, two or three batteries are connected. Three batteries produce an output voltage of 3.6 volts, while two batteries produce an output voltage of 2.4 volts.
To prevent the batteries in the Motorola baby monitor from disintegrating, they were secured with a special adhesive material resembling electrical tape. The resulting power module transmits power through a red and black wire to a special connector. This connector then connects to the baby monitor.
Main parameters
- Module voltage from 2.4 to 3.6 volts.
- Capacity from 700 – 800 mAh.
- Service life is 2 years.
- Electrolyte type: Nickel Metal Hydride Ni-MH.
- Country of origin: Japan, China, USA, Russia.
- Dimensions in millimeters: 42.00 x 20.00 x 9.00
- Weight up to 100 grams.
- Power 2.52
- Number of charge/discharge cycles: 300
- No memory effect.
This Motorola baby monitor battery should be stored at temperatures between 0 and 30 degrees Celsius.
