Grohe faucet battery and its characteristics

There are three options for finding out which battery is needed for a Grohe faucet:

Take it apart and see what's inside. This option works if the battery is actually installed.
Find the operating instructions and read about what power sources are required.
Read this article to the end!

You're lucky to have found this page online! It contains virtually all the information you need about power storage devices for this device.

Battery specifications for the Grohe faucet

Below are the basic details about the item you need.

Battery Type 2CR5
Voltage 6 volts.
Based on the type of electrolyte, it belongs to lithium power elements.
Capacity 1600 mAh.
Weight 38 grams.
Country of origin: China, Germany, Japan, USA, Finland.
Height 36 mm.
The service life is approximately two years. It all depends on the room temperature and how often the Grohe faucet is used.
Main manufacturers: VartaAnd Maxell.

May come with a plastic protective case.

The battery has a plastic casing with metal contacts on one end. They have a positive and negative terminal. polarity.

The following is prohibited with the Grohe mixer tap battery:

Below is a step-by-step diagram for replacing the battery in such a device. There is no need to remove the faucet first.

Take a 3mm Allen key and remove the screw from the back of the device.
Pull the top part up and remove it carefully.
Using smooth movements, disconnect the wire connector from the sensor power supply.
The battery is built into the top of the device. To remove it, unscrew the screws.
Remove the old batteries.
Install new ones according to polarity.
Tighten the bolts and reconnect the sensor wires. Make sure nothing is pinching them.
Connect the top and bottom parts of the Grohe faucet and tighten the screw on the back.
Check the functionality.

So, from this article, it becomes clear what kind of battery is needed for a Grohe faucet and how to change it!